Description
This professional grade Black Gloss Lacquer has been specially formulated to provide a captivating deep black gloss finish with just two coats. Not only does it dry fast, but its exceptional properties allow you to achieve unparalleled glass-like results in just hours. Use our microcrystalline wax as an overcoat so you can enjoy a finish that’s resilient to even fingerprints and smudges. Achieve outstanding results with our Black Gloss Lacquer that’s designed to suit any woodturning project. We recommend four coats and then polishing with pastes and creams for a glass-like finish. Apply two coats onto open-grained woods like ash or woods with added texture, and use our embellishing waxes over the top when dry to enhance the remaining grain or textured pattern.
Sand your work down smooth to at least 400 grit and ensure surface is free from dust, grease and moisture;
Prepare the surface well with a suitable sealer and ensure it has fully dried. We recommend our Pro Spray Sealer when using this product;
Shake can with the cap on for at least two minutes before use. Protect lathe and surfaces;
Avoid breathing spray – Use appropriate PPE and use in a well ventilated area;
Apply light coats 200mm from the piece, giving time for the lacquer to dry between coats. Two coats is usually sufficient;
Under normal conditions, this Professional Lacquer can be mechanically buffed in under 3 hours.
For a glass-like finish, use abrasive pastes and creams according to manufacturers instructions.
Use for finishing decorative wood-turned items on a lathe, flat woodwork or other items requiring a tough glossy black lacquer finish.
Black spray. Characteristic aroma of solvents and aerosols
Supplied in a 400ml aerosol tin.
Store in a cool, dry place, ideally between 10° and 30°C (50° and 90°F) Where possible. Protect from extreme heat and freezing. Keep out of direct sunlight.
Kept according to instructions, you can expect the product to last indefinitely. We recommend using the product within 12 months of purchase, though.
Unknown – product has not been tested.
SAFETY FIRST! Always read product labels, wear appropriate PPE and take steps to ensure the safety of your workshop environment and the people in it!
DANGER: Contains n-butyl acetate, Hydrocarbons, C9, aromatics, 4-hydroxy-4-methylpentan-2-one,2-methylpropan-1-ol. Flammable liquid and vapour, Causes serious eye damage, May cause respiratory irritation, May cause drowsiness or dizziness. Suspected of damaging fertility or the unborn child. Harmful to aquatic life with long lasting effects. Repeated exposure may cause skin dryness or cracking. Keep out of reach of children. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.Wear protective gloves/ protective clothing/eye protection/ face protection.IF SWALLOWED OR IN EYES: Immediately call a POISON CENTER/doctor. Do not expose to temperatures exceeding 50 °C/122 °F. Dispose of contents/container in accordance with local regulations.
~ Product Warning Symbols
Product warning symbols are displayed on products to highlight the potential dangers of some of the contents of the products – this is usually the solvents. In many cases, the warnings are irrelevant once the solvent has evaporated.
~ Safety Data Sheet
~ Liability
As the manufacturer, we cannot know all the uses the product may be used for. It is the user’s responsibility to determine suitability of use. If in doubt, contact us for advice.
Reviews
There are no reviews yet.